{"title":"Epoxy \u0026 Fillers","description":"\u003cp\u003eEpoxy and fillers: two-part epoxy adhesives in dual syringes or tubes, in gel or putty form, with minute or standard set times. The selection brings together the Permatex and Devcon brands.\u003c\/p\u003e\u003cp\u003eSupplied B2B to Senegal and Canada. Request a quote for your bulk orders. Tell us the item or application you need and we will send you an offer.\u003c\/p\u003e","products":[{"product_id":"permatex-general-purpose-5-minute-gel-epoxy-25-ml-0-84-fl-oz-dual-syringe-qm50a","title":"Permatex General Purpose 5 Minute Gel Epoxy, 25 mL (0.84 fl oz) Dual Syringe","description":"\u003cp\u003ePermatex General Purpose 5 Minute Gel Epoxy is a two-part, non-drip epoxy adhesive supplied in a dual-barrel syringe, with a blue dye indicator that fades when resin and hardener are fully mixed. Repair and maintenance crews use it to bond metal, ceramic, glass, fiberglass, hard plastic and rubber. Permatex states a set time of about 4 to 6 minutes and usable strength after four hours at 22 °C (72 °F). This is the 25 mL syringe.\u003c\/p\u003e\u003cp\u003eThe Safety Data Sheet covers a resin and a hardener, both classified as skin irritants (Category 2), serious eye irritants (Category 2A) and skin sensitizers (Category 1 and 1B), with the signal word Warning. Wear protective gloves, clothing and eye and face protection, and read the Safety Data Sheet. Will not bond most polyethylene or polypropylene plastics. Sold per syringe.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eTwo-part general purpose epoxy in a dual-barrel syringe\u003c\/li\u003e\u003cli\u003eNon-drip gel formula for less mess\u003c\/li\u003e\u003cli\u003eBlue dye indicator fades when fully mixed\u003c\/li\u003e\u003cli\u003eSets in about 4 to 6 minutes; usable strength in 4 hours at 22 °C\u003c\/li\u003e\u003cli\u003eBonds metal, ceramic, glass, fiberglass, hard plastic and rubber\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003ePermatex\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eManufacturer part number (MPN)\u003c\/th\u003e\u003ctd\u003eQM50A\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBig Papa SKU\u003c\/th\u003e\u003ctd\u003eBP-G-PER-QM50A\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eType\u003c\/th\u003e\u003ctd\u003eTwo-part general purpose epoxy gel (resin and hardener)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFormat\u003c\/th\u003e\u003ctd\u003eDual-barrel syringe, 25 mL (0.84 fl oz)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFormula\u003c\/th\u003e\u003ctd\u003eNon-drip gel with blue dye mixing indicator\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMixing time\u003c\/th\u003e\u003ctd\u003e2 to 3 min on a clean disposable surface\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eSet time\u003c\/th\u003e\u003ctd\u003e4 to 6 min\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eUsable strength\u003c\/th\u003e\u003ctd\u003e4 h at 22 °C (72 °F)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eStrength\u003c\/th\u003e\u003ctd\u003eUp to 3,400 psi, per Permatex\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBonds\u003c\/th\u003e\u003ctd\u003eMetal, ceramic, chrome, glass, fiberglass, hard plastic, rubber, fabric\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eNot for\u003c\/th\u003e\u003ctd\u003eMost polyethylene and polypropylene plastics\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003ePermatex item no.\u003c\/th\u003e\u003ctd\u003e84111 (Canada) \/ 84101 (US)\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eDocuments\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.permatex.com\/wp-content\/uploads\/sds\/84111.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.permatex.com\/products\/adhesives-and-sealants\/epoxies\/permatex-5-minute-epoxy-gel-25-ml\/\" target=\"_blank\" rel=\"noopener\"\u003eSpecification sheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":67555633889494,"sku":"BP-G-PER-QM50A","price":7150.0,"currency_code":"XOF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/8595\/3494\/files\/Permatex-84101-5-Minute-Epoxy-5-1.png?v=1791430671"},{"product_id":"permatex-2-ton-epoxy-clear-2-part-general-purpose-epoxy-25-ml-dual-syringe-84116","title":"Permatex 2 Ton Epoxy, Clear 2-Part General Purpose Epoxy, 25 mL Dual Syringe","description":"\u003cp\u003ePermatex 2 Ton Epoxy is a two-part, clear, general-purpose epoxy supplied in a 25 mL dual syringe that dispenses resin and hardener in equal volumes. Its longer working time makes it suited to multi-piece assemblies and repairs that need repositioning. Maintenance and repair teams use it to bond rigid materials such as metal, glass, fiberglass and chrome, and many plastics.\u003c\/p\u003e\u003cp\u003eThe Safety Data Sheet (WHMIS 2015) classifies the resin as a skin irritant (Category 2), eye irritant (Category 2A) and skin sensitizer (Category 1). The hardener is classified as harmful if swallowed or in contact with skin, causing severe skin burns and eye damage, and suspected of damaging fertility or the unborn child, signal word Danger. Wear gloves and eye protection, avoid breathing vapours and read the SDS before use. Will not bond polyethylene or polypropylene. Sold per syringe.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eTwo-part clear epoxy, 1:1 mix by volume\u003c\/li\u003e\u003cli\u003eDual syringe dispenses resin and hardener in equal amounts\u003c\/li\u003e\u003cli\u003eWorking time of 15 to 20 minutes per the technical data sheet\u003c\/li\u003e\u003cli\u003eFills gaps and does not shrink\u003c\/li\u003e\u003cli\u003eBonds metal, glass, fiberglass and chrome\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003ePermatex\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eManufacturer part number (MPN)\u003c\/th\u003e\u003ctd\u003e84116\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBig Papa SKU\u003c\/th\u003e\u003ctd\u003eBP-G-PER-84116\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eType\u003c\/th\u003e\u003ctd\u003eTwo-part epoxy (epoxy and amine resins)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMix ratio\u003c\/th\u003e\u003ctd\u003e1:1 by volume\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eResin appearance\u003c\/th\u003e\u003ctd\u003eClear\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eHardener appearance\u003c\/th\u003e\u003ctd\u003eClear to amber yellow\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eWorking time\u003c\/th\u003e\u003ctd\u003e15 to 20 minutes\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFixture time\u003c\/th\u003e\u003ctd\u003e20 to 30 minutes\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eHandling time\u003c\/th\u003e\u003ctd\u003eabout 60 minutes\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFinal color\u003c\/th\u003e\u003ctd\u003eClear to slightly yellow\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eService temperature\u003c\/th\u003e\u003ctd\u003e-60 °F to 180 °F (-51 °C to 82 °C)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003ePack\u003c\/th\u003e\u003ctd\u003e25 mL (0.84 fl oz) dual syringe\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eDocuments\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.permatex.com\/wp-content\/uploads\/sds\/84133.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.permatex.com\/wp-content\/uploads\/tds\/84133.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpecification sheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":67556318970070,"sku":"BP-G-PER-84116","price":7150.0,"currency_code":"XOF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/8595\/3494\/files\/Permatex-2-Ton-Epoxy-25-ML-84133-1.jpg?v=1791436514"},{"product_id":"permatex-cold-weld-steel-reinforced-2-part-epoxy-bonding-compound-2-x-28-g-tubes","title":"Permatex Cold Weld Steel-Reinforced 2-Part Epoxy Bonding Compound, 2 x 28 g Tubes (56 g)","description":"\u003cp\u003ePermatex Cold Weld is a two-part, steel-filled epoxy supplied as one tube of resin and one tube of hardener. Maintenance and repair workshops use it to fill, patch and bond iron, steel, brass, bronze, aluminum and copper parts such as cracked castings, damaged keyways and split stampings. Once fully cured it can be drilled, threaded and machined. The card holds two 28 g tubes, 56 g in total.\u003c\/p\u003e\u003cp\u003eThe Safety Data Sheet (WHMIS 2015) lists the resin as a skin irritant (Category 2), serious eye irritant (Category 2A), skin sensitizer (Category 1) and carcinogen (Category 1A), and the hardener additionally as harmful by skin contact and inhalation (Category 4), signal word Danger. Wear gloves and eye protection, work in a ventilated area and read the SDS before use. Not for bonding polyethylene or polypropylene. Sold per 2-tube card.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eTwo-part steel-filled epoxy for metal repair and bonding\u003c\/li\u003e\u003cli\u003eBonds iron, steel, brass, bronze, aluminum and copper\u003c\/li\u003e\u003cli\u003eFixture time of 8 to 10 minutes, full cure in 24 hours\u003c\/li\u003e\u003cli\u003eCured material can be drilled, threaded and machined\u003c\/li\u003e\u003cli\u003eResists water, oil, fuels and most solvents\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003ePermatex\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eManufacturer part number (MPN)\u003c\/th\u003e\u003ctd\u003e14600\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBig Papa SKU\u003c\/th\u003e\u003ctd\u003eBP-G-PER-14600\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eType\u003c\/th\u003e\u003ctd\u003eTwo-part epoxy, metal-filled\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003ePack\u003c\/th\u003e\u003ctd\u003e2 tubes, 28 g (1 oz) each, 56 g total\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMix ratio\u003c\/th\u003e\u003ctd\u003eEqual parts resin and hardener\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eAppearance\u003c\/th\u003e\u003ctd\u003eResin black, hardener beige\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eSpecific gravity (mixed)\u003c\/th\u003e\u003ctd\u003e1.79\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eWorking time\u003c\/th\u003e\u003ctd\u003e4 to 6 min\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFixture time\u003c\/th\u003e\u003ctd\u003e8 to 10 min\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFull cure\u003c\/th\u003e\u003ctd\u003e24 h\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eShear strength on steel (24 h)\u003c\/th\u003e\u003ctd\u003eAbout 3000 psi\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eTemperature range\u003c\/th\u003e\u003ctd\u003e-51 to 149 °C continuous (-60 to 300 °F)\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eDocuments\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.permatex.com\/wp-content\/uploads\/sds\/14600.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.permatex.com\/wp-content\/uploads\/tds\/14600.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpecification sheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":67556585242838,"sku":"BP-G-PER-14600","price":7600.0,"currency_code":"XOF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/8595\/3494\/files\/PX-14600-Cold-Weld-2-Part-Epoxy-2.png?v=1791441279"},{"product_id":"permatex-1-minute-general-purpose-gel-epoxy-25-ml-dual-syringe-84162","title":"Permatex 1 Minute General Purpose Gel Epoxy, 25 mL Dual Syringe","description":"\u003cp\u003ePermatex 1 Minute Gel Epoxy is a two-part, non-drip epoxy delivered in a dual syringe that dispenses resin and hardener in equal amounts. A blue dye in the mix turns clear when it is thoroughly blended, which shows the operator that it is ready to apply. Workshops and maintenance crews use it for small repairs and multi-piece assemblies on metal, ceramic, glass, fiberglass, rubber and hard plastics. The syringe holds 25 mL.\u003c\/p\u003e\u003cp\u003eThe Safety Data Sheet (WHMIS 2015) classifies the resin as a skin irritant (Category 2), serious eye irritant (Category 2A) and skin sensitizer (Category 1), signal word Warning. The hardener is classified as harmful if swallowed, in contact with skin and if inhaled (Category 4), as causing severe skin burns and serious eye damage (Category 1) and as a skin sensitizer, signal word Danger. Wear gloves, protective clothing and eye protection, and read the SDS before use. Does not bond most polyethylene or polypropylene. Sold per syringe.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eNon-drip gel epoxy in a 25 mL dual syringe\u003c\/li\u003e\u003cli\u003eSets in about 60 seconds, usable strength after 1 hour at 22 °C\u003c\/li\u003e\u003cli\u003eBlue dye turns clear when mixing is complete\u003c\/li\u003e\u003cli\u003eDries clear; no clamping required\u003c\/li\u003e\u003cli\u003eWater resistant, non-shrinking formula\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003ePermatex\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eManufacturer part number (MPN)\u003c\/th\u003e\u003ctd\u003e84162\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBig Papa SKU\u003c\/th\u003e\u003ctd\u003eBP-G-PER-84162\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eType\u003c\/th\u003e\u003ctd\u003eTwo-part gel epoxy\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003ePack\u003c\/th\u003e\u003ctd\u003e25 mL (0.84 fl oz) dual syringe\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMix ratio\u003c\/th\u003e\u003ctd\u003eEqual parts resin and hardener (1:1)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMixing time\u003c\/th\u003e\u003ctd\u003eAbout 15 s until blue turns clear\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eSet time\u003c\/th\u003e\u003ctd\u003eAbout 60 s\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eUsable strength\u003c\/th\u003e\u003ctd\u003e1 h at 22 °C (72 °F)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eStrength\u003c\/th\u003e\u003ctd\u003eUp to 2,500 psi\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFinish\u003c\/th\u003e\u003ctd\u003eClear\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eResin\u003c\/th\u003e\u003ctd\u003eClear viscous liquid, flash point about 129 °C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eHardener\u003c\/th\u003e\u003ctd\u003eAmber viscous liquid\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eDocuments\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.permatex.com\/wp-content\/uploads\/sds\/84162.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.permatex.com\/products\/adhesives-and-sealants\/epoxies\/permatex-1-minute-epoxy-gel-25-ml\/\" target=\"_blank\" rel=\"noopener\"\u003eSpecification sheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":67556585275606,"sku":"BP-G-PER-84162","price":8075.0,"currency_code":"XOF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/8595\/3494\/files\/Permatex-1-Minute-Epoxy-Gel-25-ML-84160-1.jpg?v=1791441279"},{"product_id":"devcon-5-minute-epoxy-gel-grey-25-ml-dev-tube-14240","title":"Devcon 5 Minute Epoxy Gel, Grey, 1:1 Two-Part Non-Sag Adhesive, 25 mL Dev-Tube","description":"\u003cp\u003eDevcon 5 Minute Epoxy Gel is a two-part, 1:1 epoxy adhesive with a thick, non-migrating gel body, so it stays where it is applied on vertical and overhead joints. Maintenance crews and workshops use it to bond metal, ceramic and wood and to fill gaps up to 6.35 mm (0.25 in). It comes in a 25 mL Dev-Tube dual syringe with a mixing stick on the handle.\u003c\/p\u003e\u003cp\u003eBoth components carry a Warning signal word on the Canadian Safety Data Sheet: they cause skin irritation and serious eye irritation and may cause an allergic skin reaction. Wear gloves and eye protection, mix only the amount you need, and read the Safety Data Sheet before use.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eNon-sag gel that stays put on vertical surfaces\u003c\/li\u003e\u003cli\u003e1:1 mix ratio by volume in a 25 mL Dev-Tube dual syringe\u003c\/li\u003e\u003cli\u003eWorking time 4-7 minutes; fixture time 10-15 minutes at 23 °C\u003c\/li\u003e\u003cli\u003eFills gaps up to 6.35 mm (0.25 in)\u003c\/li\u003e\u003cli\u003eService temperature from -40 °C to 93 °C (-40 °F to 200 °F)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003eDevcon\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eManufacturer part number (MPN)\u003c\/th\u003e\u003ctd\u003e14240\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBig Papa SKU\u003c\/th\u003e\u003ctd\u003eBP-G-DEV-14240\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eType\u003c\/th\u003e\u003ctd\u003eTwo-part epoxy gel\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eColour\u003c\/th\u003e\u003ctd\u003eGrey (opaque)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFormat\u003c\/th\u003e\u003ctd\u003e25 mL Dev-Tube dual syringe\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMix ratio\u003c\/th\u003e\u003ctd\u003e1:1 by volume and by weight\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eWorking time\u003c\/th\u003e\u003ctd\u003e4-7 minutes at 23 °C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFixture time\u003c\/th\u003e\u003ctd\u003e10-15 minutes\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFunctional cure\u003c\/th\u003e\u003ctd\u003e1.5 hours; full cure: 48 hours\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eLap shear strength\u003c\/th\u003e\u003ctd\u003e2,500 psi (17.2 MPa)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eHardness\u003c\/th\u003e\u003ctd\u003e82 Shore D\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eService temperature\u003c\/th\u003e\u003ctd\u003e-40 °C to 93 °C (-40 °F to 200 °F)\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eDocuments\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/itwperformancepolymers.com\/wp-content\/uploads\/14240-DEVCON%C2%AE-5-Minute%C2%AE-Epoxy-Gel-opaque-Canada.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/itwperformancepolymers.com\/wp-content\/uploads\/5-Minute-Epoxy-Gel-TDS-v3-.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpecification sheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Devcon","offers":[{"title":"Default Title","offer_id":67566437892310,"sku":"BP-G-DEV-14240","price":14525.0,"currency_code":"XOF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/8595\/3494\/files\/14240-25ml-min-scaled.jpg?v=1791564335"},{"product_id":"devcon-2-ton-epoxy-clear-1-1-two-part-medium-cure-adhesive-25-ml-dev-tube-14310","title":"Devcon 2 Ton Epoxy, Clear, 1:1 Two-Part Medium-Cure Adhesive, 25 mL Dev-Tube","description":"\u003cp\u003eDevcon 2 Ton Epoxy is a clear, water-resistant two-part adhesive that self-levels after application and cures without shrinking. It is used for structural bonding of metal, ceramics, wood, concrete and glass, alone or in combination, and for potting electronic components and assemblies. This 25 mL Dev-Tube dual syringe suits small repairs and one-off assemblies.\u003c\/p\u003e\u003cp\u003eThe Safety Data Sheet shows two different hazard levels. The resin carries a Warning signal word (skin and eye irritation, may cause an allergic skin reaction). The hardener carries a Danger signal word: harmful if swallowed or in contact with skin, causes severe skin burns and eye damage, and is suspected of damaging fertility or the unborn child. Wear gloves, protective clothing and eye or face protection, and read the Safety Data Sheet before use.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eClear, self-leveling epoxy that cures without shrinking\u003c\/li\u003e\u003cli\u003eBonds metal, ceramics, wood, concrete and glass\u003c\/li\u003e\u003cli\u003eAlso used for potting electronic components and assemblies\u003c\/li\u003e\u003cli\u003eWorking time 8-12 minutes; fixture time 30-35 minutes at 23 °C\u003c\/li\u003e\u003cli\u003eService temperature from -40 °C to 93 °C (-40 °F to 200 °F)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003eDevcon\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eManufacturer part number (MPN)\u003c\/th\u003e\u003ctd\u003e14310\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBig Papa SKU\u003c\/th\u003e\u003ctd\u003eBP-G-DEV-14310\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eType\u003c\/th\u003e\u003ctd\u003eTwo-part epoxy adhesive\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eColour\u003c\/th\u003e\u003ctd\u003eClear\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFormat\u003c\/th\u003e\u003ctd\u003e25 mL Dev-Tube dual syringe\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMix ratio\u003c\/th\u003e\u003ctd\u003e1:1 by volume; 1.2:1 by weight\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eWorking time\u003c\/th\u003e\u003ctd\u003e8-12 minutes at 23 °C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFixture time\u003c\/th\u003e\u003ctd\u003e30-35 minutes\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFunctional cure\u003c\/th\u003e\u003ctd\u003e2 hours; full cure: 16 hours\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eLap shear strength\u003c\/th\u003e\u003ctd\u003e2,250 psi (15.5 MPa)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eCompressive strength\u003c\/th\u003e\u003ctd\u003e11,000 psi (75.8 MPa)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eService temperature\u003c\/th\u003e\u003ctd\u003e-40 °C to 93 °C (-40 °F to 200 °F)\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eDocuments\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/itwperformancepolymers.com\/wp-content\/uploads\/14310-DEVCON%C2%AE-2-Ton%C2%AE-Epoxy.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/itwperformancepolymers.com\/wp-content\/uploads\/2-Ton-Epoxy-TDS-v5.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpecification sheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Devcon","offers":[{"title":"Default Title","offer_id":67566437925078,"sku":"BP-G-DEV-14310","price":17425.0,"currency_code":"XOF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/8595\/3494\/files\/14310-Devcon-2-Ton-Epoxy-25ml-min-scaled.jpg?v=1791564336"},{"product_id":"devcon-epoxy-plus-25-grey-structural-epoxy-50-ml-cartridge-14278","title":"Devcon Epoxy Plus 25, Grey Rubber-Toughened Structural Epoxy, 1:1, 50 mL Dual Cartridge","description":"\u003cp\u003eDevcon Epoxy Plus 25 is a grey, rubber-toughened, high-viscosity structural epoxy with a 25-minute working time, which leaves room to position larger parts before the bond starts to set. The maker lists it for bonding metals, thermoset plastics and structural parts, and for repairs on items such as appliances. It is supplied in a 50 mL 1:1 dual cartridge and needs a compatible dual-cartridge dispensing gun and mixing nozzle to apply.\u003c\/p\u003e\u003cp\u003eThe Safety Data Sheet classes the resin as a skin and eye irritant and possible skin sensitizer (Warning). The hardener carries a Danger signal word: harmful if swallowed or in contact with skin, causes severe skin burns and eye damage, and is suspected of damaging fertility or the unborn child. Wear gloves, protective clothing and eye or face protection, and read the Safety Data Sheet before use.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRubber-toughened structural epoxy for metals and thermoset plastics\u003c\/li\u003e\u003cli\u003e25-minute working time at 23 °C for positioning larger parts\u003c\/li\u003e\u003cli\u003eFills gaps up to 6.35 mm (0.25 in)\u003c\/li\u003e\u003cli\u003e50 mL 1:1 dual cartridge for use with a dispensing gun and mix nozzle\u003c\/li\u003e\u003cli\u003eService temperature from -40 °C to 93 °C (-40 °F to 200 °F)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003eDevcon\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eManufacturer part number (MPN)\u003c\/th\u003e\u003ctd\u003e14278\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBig Papa SKU\u003c\/th\u003e\u003ctd\u003eBP-G-DEV-14278\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eType\u003c\/th\u003e\u003ctd\u003eTwo-part, rubber-toughened structural epoxy\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eColour\u003c\/th\u003e\u003ctd\u003eGrey\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFormat\u003c\/th\u003e\u003ctd\u003e50 mL 1:1 dual cartridge\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMix ratio\u003c\/th\u003e\u003ctd\u003e1:1 by volume; 1.32:1 by weight\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eWorking time\u003c\/th\u003e\u003ctd\u003e25 minutes at 23 °C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFull cure\u003c\/th\u003e\u003ctd\u003e24 hours\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eLap shear strength\u003c\/th\u003e\u003ctd\u003e2,750 psi (19 MPa)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eT-peel strength\u003c\/th\u003e\u003ctd\u003e20-25 pli (3.5-4.4 N\/mm)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMixed viscosity\u003c\/th\u003e\u003ctd\u003e70,000 cP\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eService temperature\u003c\/th\u003e\u003ctd\u003e-40 °C to 93 °C (-40 °F to 200 °F)\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eDocuments\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/itwperformancepolymers.com\/wp-content\/uploads\/umb\/15411\/14278-devcon-epoxy-plus-25-grey-1-1-50-ml-cartridge.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/itwperformancepolymers.com\/wp-content\/uploads\/Epoxy-Plus-25-TDS-v3-.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpecification sheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Devcon","offers":[{"title":"Default Title","offer_id":67566444740822,"sku":"BP-G-DEV-14278","price":33250.0,"currency_code":"XOF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/8595\/3494\/files\/14278-Devcon-Epoxy-Plus-25-50ml-min-scaled.jpg?v=1791564393"},{"product_id":"permatex-plastic-welder-adhesive-cream-25-ml-syringe-84125","title":"Permatex Plastic Welder, Cream, Two-Part 1:1 Structural Adhesive, 25 mL Dual Syringe (84125)","description":"\u003cp\u003ePermatex Plastic Welder is a two-part, 1:1 structural acrylic adhesive for general-purpose bonding of many rigid materials, including ABS, PVC, vinyl, fiberglass, FRP, acrylic, styrene, glass, wood and SMC, in like or mixed combinations. It needs no primer, cures at room temperature, fills gaps up to 3.2 mm (0.125 in) and is water resistant. Repair shops and maintenance teams use it for plastic housings, trim and panels. It comes in a 25 mL dual syringe. The Canadian item 84125 corresponds to the maker's item 84115.\u003c\/p\u003e\u003cp\u003eNot for polyethylene or polypropylene. Both parts are highly flammable liquids and the adhesive part is classed on the Safety Data Sheet as causing severe skin burns and serious eye damage, a skin sensitizer and may cause cancer (Danger). Use only in a well-ventilated area away from ignition sources, wear gloves and eye protection, and read the Safety Data Sheet before use.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eStructural acrylic adhesive for ABS, PVC, vinyl, fiberglass, FRP, glass and wood\u003c\/li\u003e\u003cli\u003eDoes not bond polyethylene or polypropylene\u003c\/li\u003e\u003cli\u003eWorking time 4-6 minutes; fixture time 8-10 minutes\u003c\/li\u003e\u003cli\u003e1:1 mix ratio from a 25 mL dual syringe; no primer required\u003c\/li\u003e\u003cli\u003eFills gaps up to 3.2 mm (0.125 in); water resistant\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003ePermatex\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eManufacturer part number (MPN)\u003c\/th\u003e\u003ctd\u003e84125\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBig Papa SKU\u003c\/th\u003e\u003ctd\u003eBP-G-PER-84125\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eType\u003c\/th\u003e\u003ctd\u003eTwo-part structural acrylic adhesive\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eColour\u003c\/th\u003e\u003ctd\u003eOff-white (cream)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFormat\u003c\/th\u003e\u003ctd\u003e25 mL dual syringe\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMix ratio\u003c\/th\u003e\u003ctd\u003e1:1\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eWorking time\u003c\/th\u003e\u003ctd\u003e4-6 minutes\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFixture time\u003c\/th\u003e\u003ctd\u003e8-10 minutes\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFull cure\u003c\/th\u003e\u003ctd\u003e24 hours\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eGap fill\u003c\/th\u003e\u003ctd\u003eup to 3.2 mm (0.125 in)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eHardness\u003c\/th\u003e\u003ctd\u003e70 Shore D\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eTemperature range\u003c\/th\u003e\u003ctd\u003e-51 °C to 121 °C (-60 °F to 250 °F)\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eDocuments\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.permatex.com\/wp-content\/uploads\/sds\/84115.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.permatex.com\/wp-content\/uploads\/tds\/84115.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpecification sheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":67566444773590,"sku":"BP-G-PER-84125","price":5400.0,"currency_code":"XOF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/8595\/3494\/files\/Permatex-84115-Cream-Plastic-Welder-1.png?v=1791564395"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/8595\/3494\/collections\/epoxy-fillers.png?v=1766709862","url":"https:\/\/bigpapaentreprise.com\/en-us\/collections\/epoxy-fillers.oembed","provider":"Big Papa Enterprise Ltd","version":"1.0","type":"link"}