Description
Single DEWALT Power-Stud+ SD1 wedge anchor, model 7410SD1-PWR, 3/8 in (9.5 mm) in diameter and 2-1/4 in (57 mm) long, sold individually (per piece). It is a fully threaded, torque-controlled expansion anchor with a zinc-plated carbon steel body, expansion clip, nut and washer; the maker packs this size in boxes of 50, and here you buy only the quantity you need.
The maker lists it for normal-weight and lightweight concrete, concrete-filled steel deck and grouted masonry. It is drilled with a 3/8 in bit, set to a minimum embedment of 1-5/8 in (41 mm) and tightened to 20 ft-lbf (27 N·m). Installation must follow the manufacturer's instructions and the requirements of the project.
Features
- Sold individually (per piece), nut and washer included
- Fully threaded stud with zinc-plated carbon steel body and expansion clip
- Drill bit size equal to the anchor diameter (3/8 in)
- Can be installed through standard fixture holes
- Length code stamped on the head of each anchor
Specifications
| Specification | Value |
|---|---|
| Model | 7410SD1-PWR |
| Quantity | 1 anchor (per piece) |
| Diameter | 3/8 in (9.5 mm) |
| Overall length | 2-1/4 in (57 mm) |
| Approx. thread length | 7/8 in (22 mm) |
| Material | zinc-plated carbon steel (body, clip, nut, washer) |
| Drill bit | 3/8 in (9.5 mm) |
| Minimum embedment | 1-5/8 in (41 mm) |
| Minimum hole depth | 1-3/4 in (44 mm) |
| Installation torque (concrete) | 20 ft-lbf (27 N·m) |
| Wrench size | 9/16 in (14 mm) |
| Fixture hole | 7/16 in (11 mm) |
| Weight | approx. 0.04 kg (estimated) |
Part numbers
| Manufacturer part number (MPN) | Big Papa SKU |
|---|---|
| 7410SD1-PWR | BP-G-DEW-7410SD1 |
Documents