Description
Single DeWalt Power-Stud+ SD1 7449SD1-PWR wedge expansion anchor, 3/4 in (19 mm) in diameter and 10 in (254 mm) long, with 7-1/2 in (190 mm) of UNC thread. The body, expansion clip, nut and washer are zinc-plated carbon steel, and the nut and washer are supplied with the anchor. Sold individually (per piece); the manufacturer packs this size in boxes of 10.
This fully threaded, torque-controlled anchor is intended for normal-weight concrete, lightweight concrete, concrete-filled steel deck and grouted masonry. It is drilled with a 3/4 in bit, the same as the anchor diameter, and can be installed through a standard fixture hole. Installation must follow the manufacturer’s instructions and the requirements of the project.
Features
- Fully threaded, torque-controlled wedge anchor
- Zinc-plated carbon steel body, clip, nut and washer
- Nut and washer included
- Drill bit size equal to anchor diameter (3/4 in)
- Length code stamped on the head of each anchor
Specifications
| Specification | Value |
|---|---|
| Model | 7449SD1-PWR |
| Quantity | 1 anchor (sold individually) |
| Size | 3/4 x 10 in (19 x 254 mm) |
| Thread length | 7-1/2 in (190 mm) |
| Material | Zinc-plated carbon steel (body, clip, nut, washer) |
| Drill bit diameter | 3/4 in (19 mm) |
| Minimum nominal embedment | 3-3/8 in (86 mm) |
| Installation torque in concrete | 110 ft-lbf (149 N·m) |
| Socket size | 1-1/8 in |
| Manufacturer pack | 10 per box |
| Weight | approx. 0.65 kg (estimated) |
Part numbers
| Manufacturer part number (MPN) | Big Papa SKU |
|---|---|
| 7449SD1-PWR | BP-G-DEW-7449SD1 |
Documents