Description
LPS KB 88 is a red, low-surface-tension penetrating oil made to work into corroded threads and free rusted or seized nuts, bolts, hinges and other fasteners. LPS also says it displaces moisture, and the can has an Inverta spray valve so it can be sprayed at any angle. Typical uses include equipment disassembly, bearings, chains, conveyors, gears, pulleys and plumbing fixtures. This listing is the 369 g (13 wt oz) aerosol can.
The Canadian Safety Data Sheet classifies the aerosol as Flammable aerosol Category 1, Gas under pressure (compressed gas) and Aspiration hazard Category 1, signal word Danger: extremely flammable, may explode if heated, and may be fatal if swallowed and enters the airways. Do not spray on a flame or ignition source, do not pierce or burn the can, and keep it below 50 °C (122 °F). If swallowed, call a poison centre or doctor immediately and do not induce vomiting. Read the Safety Data Sheet before use. Sold per can.
Features
- Red penetrating oil for corroded and seized fasteners
- Low surface tension helps it work into tight threads, per LPS
- Displaces moisture, per LPS
- Inverta valve sprays at any angle
- NSF H2 registered for use where there is no possibility of food contact
Specifications
| Brand | LPS |
|---|---|
| Manufacturer part number (MPN) | C02316 |
| Big Papa SKU | BP-G-LPS-C02316 |
| Type | Penetrating oil (aerosol) |
| Net content | 369 g (13 wt oz) / 417 mL |
| Appearance | Red |
| Density | 0.85-0.90 (water = 1), aerosol |
| Flash point | 71.0 °C (159.8 °F), Tag closed cup |
| Flammability limits | 0.6 % (lower) to 11.7 % (upper) |
| VOC content | 24 % |
| Specification | A-A-50493D Class B Type II (aerosol) |
| NSF registration | H2, no possibility of food contact (reg. no. 138554) |
| Hazard classification | Flammable aerosol Cat. 1; gas under pressure; aspiration hazard Cat. 1 (SDS) |
Documents