Description
Single Simpson Strong-Tie Titen HD THDB62500H screw anchor, 5/8 in (15.9 mm) in diameter and 5 in (127 mm) long, supplied as one piece. It is a zinc-plated carbon-steel concrete screw with a hex-washer head, driven into a drilled hole with a 15/16 in (24 mm) socket, and the serrated tip is designed to cut its own thread in the base material.
Used to fix sill plates, ledgers, steel brackets and equipment bases to concrete or masonry. The maker lists it for dry interior environments only and does not recommend it for permanent exterior use or highly corrosive conditions. Installation must follow the manufacturer’s instructions and the requirements of your project.
Features
- Hex-washer head, no separate washer needed unless required
- Serrated cutting tip taps its own thread
- Heat-treated carbon steel with zinc plating
- Installs with a standard ANSI-tolerance carbide drill bit
- Removable, suited to temporary anchoring or relocated fixtures
Specifications
| Specification | Value |
|---|---|
| Model | THDB62500H |
| Quantity | 1 piece |
| Size (dia x length) | 15.9 x 127 mm (5/8 x 5 in) |
| Material / finish | Carbon steel, zinc plated |
| Head | Hex washer head |
| Wrench / socket size | 24 mm (15/16 in) |
| Drill bit diameter | 15.9 mm (5/8 in) |
| Minimum hole overdrill | 13 mm (1/2 in) |
| Recommended fixture hole | 19 to 20.6 mm (3/4 to 13/16 in) |
| Environment | Dry interior |
| Weight | approx. 0.14 kg (estimated) |
Part numbers
| Manufacturer part number (MPN) | Big Papa SKU |
|---|---|
| THDB62500H | BP-G-SIM-THDB62500H |
Documents