Description
Devcon 5 Minute Epoxy Gel is a two-part, 1:1 epoxy adhesive with a thick, non-migrating gel body, so it stays where it is applied on vertical and overhead joints. Maintenance crews and workshops use it to bond metal, ceramic and wood and to fill gaps up to 6.35 mm (0.25 in). It comes in a 25 mL Dev-Tube dual syringe with a mixing stick on the handle.
Both components carry a Warning signal word on the Canadian Safety Data Sheet: they cause skin irritation and serious eye irritation and may cause an allergic skin reaction. Wear gloves and eye protection, mix only the amount you need, and read the Safety Data Sheet before use.
Features
- Non-sag gel that stays put on vertical surfaces
- 1:1 mix ratio by volume in a 25 mL Dev-Tube dual syringe
- Working time 4-7 minutes; fixture time 10-15 minutes at 23 °C
- Fills gaps up to 6.35 mm (0.25 in)
- Service temperature from -40 °C to 93 °C (-40 °F to 200 °F)
Specifications
| Brand | Devcon |
|---|---|
| Manufacturer part number (MPN) | 14240 |
| Big Papa SKU | BP-G-DEV-14240 |
| Type | Two-part epoxy gel |
| Colour | Grey (opaque) |
| Format | 25 mL Dev-Tube dual syringe |
| Mix ratio | 1:1 by volume and by weight |
| Working time | 4-7 minutes at 23 °C |
| Fixture time | 10-15 minutes |
| Functional cure | 1.5 hours; full cure: 48 hours |
| Lap shear strength | 2,500 psi (17.2 MPa) |
| Hardness | 82 Shore D |
| Service temperature | -40 °C to 93 °C (-40 °F to 200 °F) |
Documents