Description
Single DeWalt Power-Stud+ SD1 7400SD1-PWR wedge anchor, 1/4 x 1-3/4 in (6.35 x 44.5 mm), sold individually (per piece). It is a fully threaded, torque-controlled wedge expansion anchor with a zinc-plated carbon steel body, expansion clip, nut and washer, with about 3/4 in (19 mm) of thread length.
Intended by the manufacturer for normal-weight and lightweight concrete, concrete-filled steel deck and grouted masonry. It is set in a 1/4 in hole drilled to the same nominal diameter as the anchor, then tightened to the torque in the manufacturer’s table. Installation must follow the manufacturer’s instructions and the requirements of the project.
Features
- Fully threaded, torque-controlled wedge expansion design
- Zinc-plated carbon steel body, expansion clip, nut and washer
- Drill bit diameter equal to the anchor diameter
- Can be installed through standard fixture holes
- Length code stamped on the head of each anchor
Specifications
| Specification | Value |
|---|---|
| Model | 7400SD1-PWR |
| Quantity | 1 anchor (with nut and washer) |
| Size | 1/4 in x 1-3/4 in (6.35 x 44.5 mm) |
| Approx. thread length | 3/4 in (19 mm) |
| Drill bit diameter | 1/4 in (6.35 mm) |
| Minimum nominal embedment | 1-1/8 in (29 mm) |
| Minimum hole depth | 1-1/4 in (32 mm) |
| Fixture hole clearance (min.) | 5/16 in (8 mm) |
| Installation torque in concrete | 4 ft-lbf (5 N·m) |
| Socket size | 7/16 in (11 mm) |
| Material | zinc-plated carbon steel |
| Weight | approx. 0.02 kg (estimated) |
Part numbers
| Manufacturer part number (MPN) | Big Papa SKU |
|---|---|
| 7400SD1-PWR | BP-G-DEW-7400SD1 |
Documents