Description
DeWalt Power-Stud+ SD1 7452SD1 wedge anchor, 7/8 in (22 mm) diameter by 8 in (203 mm) long, sold individually (per piece). It is a fully threaded, torque-controlled expansion anchor with a zinc-plated carbon steel body, expansion clip, nut and washer, and a 4-3/4 in (121 mm) approximate thread length. The nominal drill bit size equals the anchor diameter.
Designed for use in concrete and grouted masonry: set it in a hole drilled to at least 3-7/8 in (98 mm) nominal embedment, then tighten the nut to the 175 ft-lbf (237 N·m) torque the maker lists for concrete. Installation must follow the manufacturer’s instructions and the requirements of the project.
Features
- Fully threaded, torque-controlled wedge expansion anchor
- Zinc-plated carbon steel body, clip, nut and washer
- Nominal drill bit size equals anchor diameter
- Can be installed through standard fixture holes
- Length ID mark stamped on the head of each anchor
Specifications
| Specification | Value |
|---|---|
| Model | 7452SD1 (catalogue 7452SD1-PWR) |
| Quantity | 1 anchor (sold individually) |
| Diameter | 7/8 in (22 mm) |
| Overall length | 8 in (203 mm) |
| Thread length (approx.) | 4-3/4 in (121 mm) |
| Material | Zinc-plated carbon steel |
| Drill bit | 7/8 in (22 mm) ANSI carbide bit |
| Minimum nominal embedment | 3-7/8 in (98 mm) |
| Installation torque (concrete) | 175 ft-lbf (237 N·m) |
| Wrench/socket size | 1-5/16 in (33 mm) |
| Weight | approx. 0.74 kg (estimated) |
Part numbers
| Manufacturer part number (MPN) | Big Papa SKU |
|---|---|
| 7452SD1-PWR | BP-G-DEW-7452SD1 |
Documents