Description
Permatex 1 Minute Gel Epoxy is a two-part, non-drip epoxy delivered in a dual syringe that dispenses resin and hardener in equal amounts. A blue dye in the mix turns clear when it is thoroughly blended, which shows the operator that it is ready to apply. Workshops and maintenance crews use it for small repairs and multi-piece assemblies on metal, ceramic, glass, fiberglass, rubber and hard plastics. The syringe holds 25 mL.
The Safety Data Sheet (WHMIS 2015) classifies the resin as a skin irritant (Category 2), serious eye irritant (Category 2A) and skin sensitizer (Category 1), signal word Warning. The hardener is classified as harmful if swallowed, in contact with skin and if inhaled (Category 4), as causing severe skin burns and serious eye damage (Category 1) and as a skin sensitizer, signal word Danger. Wear gloves, protective clothing and eye protection, and read the SDS before use. Does not bond most polyethylene or polypropylene. Sold per syringe.
Features
- Non-drip gel epoxy in a 25 mL dual syringe
- Sets in about 60 seconds, usable strength after 1 hour at 22 °C
- Blue dye turns clear when mixing is complete
- Dries clear; no clamping required
- Water resistant, non-shrinking formula
Specifications
| Brand | Permatex |
|---|---|
| Manufacturer part number (MPN) | 84162 |
| Big Papa SKU | BP-G-PER-84162 |
| Type | Two-part gel epoxy |
| Pack | 25 mL (0.84 fl oz) dual syringe |
| Mix ratio | Equal parts resin and hardener (1:1) |
| Mixing time | About 15 s until blue turns clear |
| Set time | About 60 s |
| Usable strength | 1 h at 22 °C (72 °F) |
| Strength | Up to 2,500 psi |
| Finish | Clear |
| Resin | Clear viscous liquid, flash point about 129 °C |
| Hardener | Amber viscous liquid |
Documents