Description
Single Simpson Strong-Tie DIAB75 drop-in anchor, sold each (one piece per unit). It is a zinc-plated carbon steel sleeve with an internal thread for a 3/4 in rod or bolt, and it is installed in a 1 in (25.4 mm) hole drilled in concrete or masonry. The expansion plug is pre-assembled in the body; driving it down with the matching setting tool expands the anchor in the hole.
The top of the anchor carries a set indicator: four indentations show once the plug has been driven fully. Setting needs a separate DIABST75 tool, which is not included. Use with a carbide drill bit of the stated diameter. Installation must follow the manufacturer's instructions and the requirements of your project.
Features
- Sold singly (one anchor per unit)
- Zinc-plated carbon steel body
- Internal thread for 3/4 in rod or bolt (10 TPI)
- Pre-assembled expansion plug, set by driving it down with a setting tool
- Four-indentation set indicator on the top of the anchor
Specifications
| Specification | Value |
|---|---|
| Model | DIAB75 |
| Quantity | 1 piece |
| Material | Carbon steel, zinc plated |
| Rod / bolt size | 3/4 in (19 mm), 10 TPI |
| Drill bit diameter | 1 in (25.4 mm) |
| Anchor length | 3-1/8 in (79 mm) |
| Thread length | 1-1/4 in (32 mm) |
| Min. embedment | 3-1/8 in (79 mm) |
| Setting tool (sold separately) | DIABST75 |
| Weight | approx. 0.09 kg (estimated) |
Part numbers
| Manufacturer part number (MPN) | Big Papa SKU |
|---|---|
| DIAB75 | BP-G-SIM-DIAB75 |
Documents