Description
Structural connector screw made to replace nails in Simpson Strong-Tie connectors, for wood framing work where a screw is easier to place than a hammered nail. The shank is shaped to match the fastener holes of the connectors, and the mechanical galvanizing suits interior use and most exterior conditions.
Supplied as a pack of 100 screws with a 1/4 in hex driver. Install square to the surface of the wood and respect the minimum spacing and edge distances given by the manufacturer. Do not mix nails and SD screws within the same connection.
Features
- Replaces nails in selected Simpson Strong-Tie connectors
- Shank shaped to fit the connector holes
- Hex head with integrated washer, stamped with the maker's mark and screw size
- Mechanically galvanized coating
- 1/4 in hex driver included
Specifications
| Specification | Value |
|---|---|
| Brand | Simpson Strong-Tie |
| Model | SD9212R100-R |
| Screw size | #9 |
| Length | 2-1/2 in (63.5 mm) |
| Shank diameter | 0.130 in (3.3 mm) |
| Head diameter | 0.370 in (9.4 mm) |
| Thread length | 1-1/8 in (28.6 mm) |
| Threads per inch | 8-1/2 |
| Head | hex with integrated washer |
| Drive | 1/4 in hex |
| Point | sharp |
| Finish | mechanically galvanized (ASTM B695 Class 55, per the manufacturer data sheet) |
| Pack quantity | 100 |
Part numbers
| Manufacturer part number (MPN) | Big Papa SKU |
|---|---|
| SD9212R100-R | BP-HW-SST-SD9212R100R |
Documents